Tribological behaviour of PA6/diborontrioxide composites

Abstract

Abstract PA6 micro composites with different weight percentage of diboron trioxide (B2O3) were fabricated by a twin-screw extruder and analysed for tribological behaviour. The weight percentage of B2O3 were 2, 4, and 8wt% of PA6 matrix. Tribological tests were performed on pin-on-disc apparatus under different loads, sliding distances, and sliding velocities. Results were shown for individual varying parameter as well as with the combination of two and all three varying parameters conditions. Results of the tribological study shows that the PA6 composite with 2wt% diboron trioxide fillers exhibits lowest friction coefficient (COF) and wear rate compare to others and followed by PA6 with 4wt% diboron trioxide filler composite. PA6 with 8wt% diboron trioxide fillers were not found effective in reducing COF and wear rate, infect it increased the COF and wear rate of PA6 and found maximum compare to pure PA6 and PA6 with 2 and 4wt% diboron trioxide fillers.