Humidity Analysis Using 808H5V5 by Mean Formula

Abstract

Abstract Humidity and noise in the baby incubator are parameters that must be maintained according to the BPFK (Health Facility Security Center) standard, which is fifty to sixty percent for humidity. Moisture needs to be maintained to keep the stability of the baby’s body temperature. Therefore, the authors intend to make a calibration tool for baby incubators (incubator analyzers) with moisture parameters. To measure the moisture content, the 808H5V5 sensor was used, while the minimum system used was Arduino Uno. The test method used to see the performance of this tool were to compare the values in the humidity of the TA module, the incubator analyzer with a comparison (Temperature Humidity Meter). At the humidity reading, the error value was below two percent, where the biggest error in the measurement value of 37 Celcius degree is 1,56 percent. The tool is functioning properly as incubator analyzer because it has an error below tolerance of approximately five percent.