Study on the Physical Properties of Split-type Iron Base Shape Memory Alloy Pipe Joint

Abstract

Abstract Aiming at the leakage phenomenon of pipeline system due to corrosion and other reasons, a split type iron-based shape memory alloy pipe joint based on the button bond connection was designed for repair. This split-type pipe joint can be used for quick in-situ maintenance of pipelines without cutting off pipelines or stopping transmission without pressure relief. It is especially suitable for intensive pipeline maintenance and online emergency maintenance. In order to study the connection performance of the split iron-based shape memory alloy pipe joint, this paper took the Fe17Mn4Si10Cr4Ni alloy pipe joint as the research object, and carried out pressure sealing and pull-out experiments respectively on the integral pipe joint and the split pipe joint which had not been carried out and had been subjected to one heat and mechanical training. The results showed that, compared with the integral pipe joint, the pressure seal value of the split pipe joint decreased by 40% to 20MPa and the pulling force decreased by 48.9% without heat-mechanical training. However, after 1 time of thermal-mechanical training, the pressure sealing value of the split-type pipe joint decreased by 12.5% to 32MPa and the pulling force decreased by 21.2% compared with the integral pipe joint. It can be seen that thermal-mechanical training can significantly improve the joint performance of split pipe joints, and the split pipe joint can meet the requirements of medium and low pressure pipeline connection and maintenance.