Modified phosphate coatings applied to steel by cold method

Abstract

Abstract The deposition of phosphate coatings occurs on the surface of the product when it is immersed in a solution containing phosphoric acid. The formation of a film on the metal surface occurs during the deposition of insoluble two- and three-substituted phosphates of iron, manganese, and zinc from a solution. To speed up the process and conduct phosphating at low temperatures, nitrates, nitrites, and fluorides of active metals are introduced into the solution. Organic compounds, such as glucose, glycerin, Trilon A, and Trilon B, are buffer additives to maintain the pH of phosphating solutions in the range of 2.6-3.2. It was found that 10-15 minutes at a process temperature of 20-25 °C are sufficient for the formation of a protective phosphate coating from solutions containing modifiers. The content of zinc phosphates in the modified phosphate coatings is increased. Additives in cold phosphating solutions have a positive effect on the quality and protective properties of the resulting phosphate films. Modified phosphate coatings obtained by the cold method have a fine-crystalline structure, a smooth surface and low porosity.