Approach to setting the mode parameters in combined electro-erosive - electrochemical processing during piercing the deep holes of small diameter

Abstract

Abstract The article considers the problem of forming the deep holes of small diameter by using the combined electro-erosive and electrochemical machining based on the electrochemical and electro-erosive processes. The approach to setting the mode parameters during piercing the deep holes with a diameter of less than 1 mm is suggested. The approach takes into consideration the influence of hydrodynamic losses in the inter-electrode gap on the limitation of the mode parameters of the electrochemical and electro-erosive components in the combined processing. It also takes into account the interrelation between the magnitude of the inter-electrode gap and the linear velocities of the removal of the processed material in each of the components during the combined processing. The validity of the approach to setting the mode parameters in the combined electro-erosive -electrochemical processing during piercing the deep holes with a diameter from 0.3 mm to 1 mm in the range of the inter-electrode gap from 0.025 mm to 1 mm is experimentally confirmed.