Realizing the load shifting potential of residential space heating - A field study on the control input for thermostatic control of indoor air temperature

Abstract

Abstract Economic model predictive control (MPC) of residential space heating utilizes indoor air temperature fluctuations and thermal mass for load shifting of space heating consumption and it can be used for various demand response purposes in district heating systems. A field experiment imitating the behaviour of an MPC has previously been carried out in three residential buildings in Aalborg, Denmark. Here, digital radiator thermostats were used, and it was found that the load shifting period was cut short when using the temperature measurement embedded in the thermostat as control input for the MPC. Therefore, the field study reported in this paper investigated whether using indoor air temperature sensors as control input for the thermostat improved the realisation of the load shifting. The field study took place in a single-family house in Aarhus, Denmark, and tested the load shifting potential when controlling with either the temperature sensor embedded in the thermostat or an offset between the radiator thermostat setpoint and an indoor air temperature sensor measurement. The study indicates that the use of indoor air temperature measurements as thermostat control input will provide longer periods of loading and unloading the building, thereby increasing the total load shifting potential of the heating consumption.