Surface Energetics Effects on Mechanical Strength of Fibre Reinforced Polymer Matrix

Abstract

Abstract Surface energetics effects on the mechanical strength of fibre reinforced polymer matrix been studied employed the manual scraper mechanism in extracting fibre from plantain pseudo-stem and was treated with nine different treatments. Cylindrical shape mould was prepared for mechanical test samples with continuous and unidirectional aligned fibres. Two probe liquids; water and glycerol were used in contact angle measurement for all the treated and untreated samples. The contact angle data was used for the interfacial energetics computations using Neumann and Fowkes models and the mathematical analysis were carried out using Matlab software tools. van der Waals notion of particle-particle interaction was employed to explain the physiochemical properties such as the surface interfacial energies. The average value for the interfacial free energy of adhesion for fibre-water and fibre-glycerol are -10mJ/m2 and -16MJ/m2 respectively signifying attractive van der Waal forces. The tensile test results unveil that the average value for treated fibres is greater than the average value of 171.29N/mm2 for untreated fibre except for potassium permanganate and phosphoric acid. These results reveal that an increase in tensile strength leads to an increase in the interfacial surface energy of adhesion. The treated fibres show a significant increase in interfacial surface energy and change in free energy of adhesion which suggests a better bonding mechanism of interaction between the fibre and matrix except for phosphoric acid which reveals otherwise, it may be as a result of the chemical chopped off the fibre during the treatment. The average strain rate of about 0.003 per seconds, 0.002 per seconds and 0.005 per seconds were deduced from the treated Mercerization, Acetone and MEKP respectively which reveals the lower strain rate as compared to the untreated fibre of 0.008 per seconds. The negative strain rate for the potassium permanganate and phosphoric acid was found to be -0.002 and -0.001 respectively reveals that the treatments will debond faster than other treated fibres..