Test Method of Communication Protocol of Standard Group Components of Electric Vehicle Charging Equipment

Abstract

Abstract In recent years, the rapid development of the electric vehicle industry has made the research on the communication protocol detection of the standard components of its charging equipment more and more important. The consistency of the charging communication determines whether the charging process can be carried out normally. During the charging process, the inconsistent communication messages of the standard components will directly lead to the failure of the charging process of the electric vehicle charging equipment. The purpose of this article is to study the communication protocol test method of the standard set of electric vehicle charging equipment. This article first analyzes the whole process of DC charging of electric vehicle charging equipment, and determines the detection method combining positive detection and negative detection according to the various stages of communication, and explains it. Then analyze and study the consistency of the communication protocol of the electric vehicle charging equipment standard group components, and determine the test indicators used to test and evaluate the DC charging communication consistency of the electric vehicle charging equipment. Finally, according to the analysis and research on the consistency of DC charging communication of electric vehicle charging equipment, a test plan for testing the consistency of communication is determined. The experimental data shows that the leakage current limit set in the experiment is 30mA, and the maximum error in the actual measurement is 1.1mA. The test results show that the controller on the cable can provide protection in case of leakage, and the measurement error is less than ±5mA.