Power Generation using Thermoelectric Power Generator with Parabolic Solar Dish Concentrator

Abstract

Abstract Solar Thermoelectric Generator (STEG), a hybridization system of thermoelectric generator (TEG) with a heat exchanger have been thoroughly explored because of its ability to produce both electricity and heat simultaneously. In this research, two tests were conducted: single TEG characterization test and STEG application. A theoretical modelling was developed based on the characterization test. For the STEG application, a solar parabolic dish concentrator and a single TEG were used to produce both heat and electricity simultaneously. An absorber plate placed on the focal point of the dish was used to facilitate the heat transfer of the reflected solar radiation to the TEG through the plate. The effects of various temperature difference were investigated. The absorber plate thickness was 1 mm and made up from copper to ensure high heat transfer rate and was well insulated so as to ensure minimal heat loss. To evaluate the performance of the TEG under the various temperatures, water-cooled cooling method (with water cooling jacket) and air-cooled cooling method (with finned heat sink and USB powered fan) were employed. Results showed that water-cooled cooling method was able to enhance the performance of STEG for higher power generation than air-cooled cooling method.