Simulation of Particle Motion Behavior in Fluidized Bed Opposed Jet Mill

Abstract

Abstract In order to study the influence of the internal flow field of the fluidized bed opposed jet mill on the motion behavior of particles, Computational Fluid Dynamics (CFD) and Discrete Dlement Method (DEM) are used for coupling calculations. By adjusting the nozzle spacing and inlet pressure, Numerical simulation is carried out on the process of particles collisions with each other after accelerating under the high-speed jet produced by the nozzle. The trajectory of the particles in the flow field of the collision area and the change of the collision state of the particles are analyzed. Finally, the best parameters are selected based on the total collision energy. The results show that the particles will gradually shift and spread during the acceleration process. The reduction of the nozzle spacing is beneficial to increase the probability of particle collisions. However, if the spacing is too small, the particles cannot be fully accelerated; the increase in inlet pressure will increase the kinetic energy of the particles, and number of collisions is almost unaffected. By comparing the total collision energy, the best-simulated preparation conditions are selected as 110mm and 1.1MPa.