Computational model of a micropolar lubricant with a non-standard support profile and a metal coating at incomplete filling of the working gap

Abstract

Abstract The authors propose an asymptotic and exact self-similar solution for zero (without considering the melt) and the first (considering the melt) approximation of a wedge-shaped sliding support with a profile adapted to friction and a fusible metal coating of the guide surface. The solution is based on the equation of a micropolar liquid flow for a “thin layer”, the continuity equation, as well as the equation describing the profile of the molten contour of a guide coated with a fusible metal alloy. The authors have taken into account the formula of the rate of mechanical energy dissipation as well as rheological properties of the lubricant and the melt, which have micropolar properties in the laminar flow mode at incomplete filling of the working gap. Analytical dependences have been obtained for the profile of the molten surface of the guide coated with a low-melting metal alloy, as well as for the velocity and pressure fields at zero and first approximation. In addition, the main operating characteristics of the friction pair under consideration have been determined: the bearing capacity and the friction force. The article contains estimation of the influence of the parameters conditioned by coating melt and adapted to the friction conditions of the support profile, and the parameter characterizing the rheological properties of the lubricant, as well as the length of the loaded area in terms of bearing capacity and friction force.