Author:
Milov A V,Tynchenko V S,Kurashkin S O,Petrenko V E
Abstract
Abstract
The article is devoted to a review of approaches used to simulate thermal processes occurring during electron beam welding of thin-walled products. The analysis of more than fifty sources is carried out on the basis of which ideas about the current state of the problem considered in the article are formed. To implement the simulation, it is possible to use modern software systems such as: ANSYS, Comsol Multiphysics, Abaqus and NX Nastran, each of which has its own set of advantages and disadvantages. By using the method of expert evaluation on the basis of the formulated criteria, the most effective software was selected. The results of the study of mathematical models implemented in the selected software system will allow not only to get an idea of the thermal process occurring during electron beam welding of thin-walled products, as such, but also to form a mathematical justification for making technological and control decisions.
Subject
General Physics and Astronomy
Reference60 articles.
1. Automation of monitoring and management of conveyor shop oil-pumping station of coal industry enterprise;Tynchenko;IOP Conference Series: Earth and Environmental Science,2018
2. Algorithmic and Software to Identify Errors in Measuring Equipment during the Formation of Permanent Joints;Milov,2018
3. Complex of automated equipment and technologies for waveguides soldering using induction heating;Murygin;IOP Conference Series: Materials Science and Engineering,2017
4. Magnetic impact dampening of vibrations in technological equipment for oil and gas production;Bukhtoyarov;International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM,2018
5. Optimizing the control process parameters for the induction soldering of aluminium alloy waveguide paths;Tynchenko;IOP Conference Series: Materials Science and Engineering,2017