Power Factor Correction Using Programmable Logic Control Based Rotary Method

Abstract

Abstract The power factor value of an induction motor is low. This power factor value is due to the large reactive power. Therefore, it is necessary to add capacitors to improve the power factor. The addition of this capacitor uses a capacitor bank with the rotary method. This rotary method is expected to be able to improve the low power factor. The method used is to determine the set point of the desired power factor. Then this method will add the value of the capacitor bank if it does not meet the set point. If it exceeds the set point value, this method will reduce the value of the capacitor bank. For programming this method using Programmable Logic Control. Programmable Logic Control can perform real time monitoring. The results of the test method showed that the capacitor bank worked to improve the power factor optimization. From the power factor of the drilling machine 0.54 to 0.86 in the test. Further developments can make capacitor sizes smaller and more varied in order to optimize the power factor.