Development of a method for wireless information transmission in wells equipped with sucker rod pump units

Abstract

Abstract Oil lifting via sucker rod pump units is the most widespread way to extract oil reservoir products. Complications adversely affecting the operation of downhole equipment and entailing increased wear and premature failure of sucker rod pump units arise in the process of high-viscosity oil production. The pressure and temperature of the well fluid are the main parameters for assessing changes in the properties of the extracted products and for determining the static level of the liquid column. It is possible to control pressure and temperature using sensors located in the immediate vicinity of the well pump. Today, a wired channel is the main way of transmitting the measured data to the well mouth. The present work proposes a new technical solution for a wireless communication channel along tubing strings and rods. The columns are separated by asphaltenes deposits on the surface of the columns and centralizers mounted on the rods. The rod string isolation from the tubing string at the wellhead is carried out through suspension modernization. Columns are closed inside the pump, specifically, on the cylinder-plunger contact. Information is transmitted from the bottom by means of a submersible module, consisting of an electrical separator and electronic circuit. The latter controls the separator closure and opening. The results of measurements of the resistance between the columns indicate the possibility of implementing a communication channel.