Author:
Anuar Mirza,Yeng Seng Lee,Shakhirul M. S.,Wee F.H.,Seng Gan Hong,Jusoh Muzammil,Sabapathy Thennarasan,Osman M.N.
Abstract
Abstract
This paper presents a chipless textile tag for RFID application. The CST microwave studio was used to design the chipless textile RFID tags which consist of three, four, and five slotted ring resonators nested in the circular patch. The RFID tag also fabricated using shieldit super fabric as conductive patch plane and the polyester fabric as substrate. The designed tags can operate over 1 GHz to 3 GHz frequency ranges. Each of the slot ring resonators are generate different reflection coefficient spectrum. The larger the slot ring create a resonate frequency at lower frequency. The measured and simulated results of the different slot ring chipless textile RFID tags are discussed.
Subject
General Physics and Astronomy
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
1. A Design Methodology for Sensing-Ready Concentric Rings-Based Chipless RFID Tags With Effective Spectrum Use and High Coding Capacity;IEEE Journal of Radio Frequency Identification;2024
2. Application of conductive tapes and foils in textile electronics;2023 10th International Conference on Electrical, Electronic and Computing Engineering (IcETRAN);2023-06-05
3. Investigate Bending Effect of Wearable GPS Patch Antenna with Denim and Polyester Fabric Substrate;International Journal of Electronics and Telecommunications;2022-12-27
4. 12-Bit Chip-less RFID Tag with High Coding Capacity per Unit Area;2022 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (AP-S/URSI);2022-07-10
5. A Compact Chip-less RFID Tag for IoT Applications;2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting;2020-07-05