Simulation System for PeLUIt 150 MW Nuclear Reactor by using vPower

Abstract

Abstract In developing the PeLUIt 150 MW nuclear power plant based on the High Temperature Gas-cooled Reactor (HTGR) technology, with the helium-coolant and output thermal power of 150 MW, the PeLUIt simulator is also developed for training the operators and educating other technical personnel. Referred to the balance of plant (BOP) design of the PeLUIt, the simulator utilized the vPower simulation platform to simulate the secondary loop for power generation with a water-steam Rankine cycle. The paper focuses on developing the secondary loop’s main components: steam generator, steam turbine, condenser, deaerator, and feedwater pump. The reactor module in the primary loop is simplified as a heat source with 150 MW output. The steam generator that connects the primary and secondary loops is modeled with the heat exchanger module by transferring heat from helium to water/steam. Meanwhile, pressure and flow parameters can also be simulated for both helium and water/steam flows in steady-state and transient operating conditions. The steady-state simulation results are almost the same as the design data. The differences in the main steam temperature, feedwater pressure, and feedwater temperature, are 0.03%, 0.53%, and 0.02%, respectively. Meanwhile, the transient condition carried out in the loss of coolant accident showed a decrease in flowrate of 43.31 kg/s and an increase in temperature of feedwater and main-steam of 52.32 and 15.38 °C, respectively. In addition, there was a pressure drop of around 10.37 (feedwater) and 10.16 MPa (main-steam).