Author:
Meena SL,Tyagi Ankit,Murtaza Qasim,Walia R.S.,Niranjan MS
Abstract
Abstract
Al2O3 HVOF sprayed coating has been deposited with controlled process parameters. SEM characterization was used to characterize the deposited coating. Wear, Residual stresses, COF and hardness, are studied at variable load of 40, 50, 60 and 70N. Surface morphology of Al2O3 HVOF coating shows a molten and un-molten powder with curved laminar structure and confirm homogeneous coating. Experimental results revealed that with increase in load wear, hardness, residual stresses, and COF results were enhanced at higher load (70N). Experimental result shows wear value reduces to 80 microns and COF decreased to 0.25, while hardness and residual stresses increased to 470 HV and -20 MPa respectively. The experimental test results reveal that decrease in COF and wear may be occurs oxide layer formation or due to tribo-film formation under increasing load condition
Subject
General Physics and Astronomy
Reference19 articles.
1. Corrosion properties of carbon ions implanted chromium coating prepared on CSS-42L aerospace bearing steel;Wang;Surface & Coatings Technology.,2017
2. Tribological behavior of carbon coating for piston ring applications using Taguchi approach;Tyagi;Materials Today Procedding,2019
3. Tribological behavior of sustainable carbon based composite coating for wear resistance applications;Tyagi;Material Research Express,2019
4. Characterization and parametric optimization of tribological properties of Mo blend composite coating;Tyagi;Material Research Express,2019
5. On the boundary conditions in multi-phase flow through the piston ring-cylinder liner conjunction;Shahmohamadi;Tribology International,2015
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献