Author:
Guo Hua,Yu Wangyang,Zhou Jian,Li Hongjun,Shen Fangming,Zhang Jinjian
Abstract
Abstract
In order to improve the flowability of lithium hydroxide powder, the lithium hydroxide powder in a company was selected under the conveying condition. The degree of circularity was used to quantitatively characterize the micro-morphology of the powder, and the influence of particle size on the flowability of lithium hydroxide powder was studied by the angle of repose method, HR method and Carr flowability index method. The results show that the lithium hydroxide powder gets better with the increasing of particle size. But the flowability of fine particles (≤ 100μm) is poor, while the flowability of medium particles (100~200μm) and coarse particles (≥ 200μm) is good. Based on the experimental results. It is suggested that the inclination angle of silo should be designed to be no less than 500 and the content of powder with particle size less than 100μm in lithium hydroxide should be controlled to improve the conveying efficiency of lithium hydroxide powder.
Subject
General Physics and Astronomy
Reference13 articles.
1. Multi-electron reaction materials for high energy density batteries;Gao;Energy & Environmental Science,2010
2. Surface treatment of rare earth-magnesium-nickel based hydrogen storage alloy with lithium hydroxide aqueous solution;Yuan;International journal of hydrogen energy,2015
3. Selective lithium recovery and integrated preparation of high-purity lithium hydroxide products from spent lithium-ion batteries;Liu;Separation and Purification Technology,2021
4. Effects of particle size and moisture content of Shenfu soft coal powder on its fluidity parameters;Wang;Journal of East China University of Science and Technology: Natural Science Edition,2008
5. Measurement of flowability of coal powders and research methods;Qi;CIESC Journal,2012