Determination of optimum process parameters for minimum punch force in deep drawing using numerical simulation

Abstract

Abstract This article represents the most common sheet formation method, deep drawing. This technology is employed in the production of the automotive and aerospace industries. There are various aspects that have an impact on the deep drawing process; these factors are known as the deep drawing process parameters. Finite element analysis and Taguchi Techniques are coupled to find out the optimum deep drawing parameters. Six process parameters such as die corner radius, punch corner radius, punch speed, friction between blank and die, friction between blank and blank holder and friction between blank and punch are used for analysis. Punch force is considered as response variable. The Taguchi method is employed to determine the optimal process parameters for the deep drawing process. Based on SN ratio analysis, optimum deep drawing parameters for punch force were found to be die corner radius of 7mm, punch corner radius of 7mm, punch speed of 0.2mm/s, friction between blank and die of 0.08, friction between blank and blank holder of 0.08 and friction between blank and punch of 0.10. From ANOVO, it was found that die corner radius was the most significant process parameter influencing minimum punch force.