Development and Application of Medium-reactivity Epoxy Infusion Resin System in Large-scale Wind Turbine Blades

Abstract

Abstract In view of the requirement of cost reduction and efficiency increase for large-scale wind turbine blades, a medium-reactivity epoxy infusion resin system was developed, which contained 20% fast curing agent and 80% slow curing agent. The properties of medium-reactivity epoxy infusion resin system were evaluated via physical and chemical analysis, application process ability analysis, resin clear casting mechanical properties analysis, and laminate specimens mechanical properties analysis. The results indicated that the mechanical properties of this medium-reactivity epoxy infusion resin system can meet the requirements of blade design, and the pre-curing time of the resin was reduced from 3.0h to 2.3h. The application process ability of medium-reactivity epoxy infusion resin system in large-scale wind turbine blade was also verified. The blade parts pre-curing time was shortened by 0.5-1 hour, which meets the target of blade cost reduction and efficiency increase.