Cathodic nitriding and anodic polishing of Ti6Al4V alloy by plasma electrolysis

Abstract

Abstract The paper presents the results of studies on modifying the surface of Ti6Al4V titanium alloy by combined exposure to cathodic nitriding and anodic polishing in electrolysis plasma. The morphology and roughness of the surface, microhardness of the modified layer have been investigated. Wear resistance was studied under dry friction conditions. The effect of combined treatment on corrosion resistance of Ti6Al4V alloy was examined by means of potentiodynamic polarization in Ringer’s solution. It has been established that cathodic nitriding at 750 °C for 10 min leads to the hardening of the surface layer up to 820 HV with an increase in roughness by 2 times and wear resistance almost 3 times. Subsequent anodic plasma electrolytic polishing of the nitriding surface in solution of ammonium sulfate leads to a decrease in roughness and friction coefficient with an increase in corrosion resistance.