Author:
Wang Jiguang,Xu Feng,Wang Li,Chen Xudong,Chen Qiuling,Han Fei,Huang Youxian,Li Xuan,Xu Qingyun,Ge Yu,Gu Wangwen,Dai Xinghai
Abstract
Abstract
This paper focuses on the offline electric heating regeneration technology of DPF (Diesel Particulate Filter). Based on the actual operating conditions of the airport passenger elevator, the pressure drop changes before and after the offline regeneration of DPF, the passive regeneration process during the vehicle operation, and the capture efficiency of PM and PN after the offline regeneration of DPF are studied. The DPF pressure drop increases with the operation time because of the extremely low efficiency of passive regeneration before offline regeneration, and the initial pressure drop after regeneration is slightly higher than that of the fresh carrier due to the existence of ash. When the exhaust temperature reaches 420°C, the DPF passive regeneration rate is higher than the capture rate, and the DPF pressure drop drops rapidly when the passenger elevator continues to run. The mass fraction of fine particulate matter is more than 0.02μm in the cold start stage, while the mass fraction of fine particulate matter is more than 0.02μm in the hot start stage.
Subject
Computer Science Applications,History,Education