Design of a Floating Vertical Axis Wind Turbine for Wind-Wave Basin Experiments

Abstract

Abstract This paper presents the design and manufacturing of two novel small floating Darrieus vertical axis wind turbines (VAWT) developed for a wind-wave basin test campaign. As with typical designs, the rotor design needed to satisfy the traditional structural safety requirements (such as strain, deflection, resonant-free dynamics) from design standards along with other manufacturing and assembly constraints. In addition, for this particular design, some special conditions are present as the facility (the wind-wave basin itself) and use of existing Floating Offshore-wind and Controls Advanced Laboratory (FOCAL) semi-submersible floating platform (originally designed for HAWT test) imposed an additional set of design requirements including wind speed and size constraints, and specific, target overturning moments and rotor mass. Addressing all these constraints (facility, existing hull, structural safety, and manufacturing) presented a challenging design task in this case, thus the focus of this paper is presenting the design approach and results leading to final designs satisfying all these competing requirements. Using the presented design process, two Darrieus troposkein-shaped vertical axis wind turbines (two-bladed and three-bladed versions) were designed and manufactured, after ensuring compliance with all the design requirements. The presented study can aid researchers interested in developing similar floating turbine test campaigns.