Author:
Wang Zhiyuan,Yang Xuefeng
Abstract
Abstract
Due to the complexity and harshness of the spline’s working environment, the wear of teeth micro movement is severe, which will most likely lead to coupling failure and reduce the stability of the aerospace transmission system. This paper carries out air pressure 0.1MPa, 0.2MPa, 0.3MPa, 0.4MPa, and 0.5MPa shot peening on the commonly used material, 42CrMoA steel, to improve the wear resistance of the spline to study the wear resistance of the steel under different air pressure. The test results show that increasing the air pressure of shot peening can make the 42CrMoA steel surface residual stress and hardness first increase and then decrease, the depth of the hardened layer increases, wear resistance is improved, the wear mechanism from adhesive wear to abrasive wear.
Reference10 articles.
1. Contact stress prediction and fretting wear measurement of aeronautic crowned involute splines[J];Yuan,2024
2. Analysis of the pressure distribution in spline couplings[J];Cuffaro;Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,2012
3. Effect of High Energy Modification Experiment on the Surface Property of Aviation Spline Shaft Steel [J];Jianghe;Scientific and Technological Innovation,2023
4. Development and research of shot peening technology [J];Peng;Metal World,2020
5. Effect of shot peening treatment on corrosion resistance of 6061 aluminum alloy [J];Kun;Journal of Hunan University of Arts and Science(Natural Science Edition),2024