Author:
Vasil’ev E V,Popov A Yu,Chernykh I K
Abstract
Abstract
Thermomechanical method of increasing the mechanical properties of cermets leads to a buildup in the durability of cutting tools up to 2 times. However, after thermomechanical processing, a defective layer of 0.8 mm in-depth forms on the outer surface of the processed workpiece, which is caused by of the oxidation of WC tungsten carbide. In order to prevent oxidation on the workpiece surface, it is proposed to use a nickel coating, which reduces the oxidation of WC by more than 30 times when it is heated to a temperature of 1000 °C.
Subject
General Physics and Astronomy
Reference16 articles.
1. Increasing the wear resistance of a complex profile cutting tool by applying a diffusion discrete coating;Chekalova,2019
2. Cutting performance and wear mechanism of Sialon ceramic tools in high speed face milling GH4099;Sun,2019
3. A novel method of assessing and predicting coated cutting tool wear during Inconel DA 718 turning;Capasso;Wear,2019
4. Investigation of wear mechanisms for the rake face of a cutting tool with a multilayer composite nanostructured Cr–CrN-(Ti,Cr,Al,Si)N coating in high-speed steel turning;Vereschaka,2019
5. Cutting performance and wear mechanism of TiB2-B4C ceramic cutting tools in high speed turning of Ti6Al4V alloy;Tan;Ceramics International,2018