Wave Active Low Pass Filter Employing Modern Active Block VDDIBA

Abstract

Abstract This paper presents a second and third-order wave active low pass filter (WALPF) using modern active block Voltage Differencing Differential Input Buffered Amplifier (VDDIBA) with a lower supply voltage of 1V. The wave-active approach is chosen for the filter designing to get a higher order, lower sensitivity, modular and stable filter structure. The design procedure of WALPF involves the implementation of wave-active equivalent for series inductor and shunt capacitor. And it needs to realize the subtractor block physically, and the lossy subtractor integrator block using VDDIBA gives a flavor of differencing voltage property. So, the physical implementation of the subtractor block and the lossy subtractor integrator block goes very smoothly using this block. It is considered a possible reason for reducing active blocks and passive components. Theoretical justification of the proposed WALPF is achieved by using the wave-equivalent concept of the wave-active approach. This method of WAF design consists of only one resistor and capacitor, making the filter structure less complex easy to use with a cut-off frequency of 10MHz. Finally, the workability test is examined with the PSPICE simulation that results in the WALPF frequency response using 180 nm TSMC CMOS technology parameter for VDDIBA.