Rotorcraft thickness noise control by tip ventilation

Abstract

Abstract The paper explains further developments of a new concept called TNC (Thickness Noise Control) of the application of surface ventilation to the reduction of helicopter rotor low-frequency in-plane harmonic (LF-IPH) noise. The TNC method is based on introduction of four cavities covered by perforated plates (connected to low and high pressure reservoirs) and positioned symmetrically at the front and rear extremities of the blade tip. Two operational modes are analyzed: constant (steady) and periodically varying (unsteady) transpiration mass-fluxes. For exemplary two-bladed model helicopter rotor of Boxwell et al. (Bell UH-1H Iroquois helicopter) in hover conditions, the results of numerical simulations, based on the CFD code SPARC (Spalart-Allmaras turbulence and Bohning-Doerffer transpiration models), suggest that the acoustic pressure fluctuations are significantly reduced in the near-field of the blade tip. Moreover, the unsteady approach (designed for forward located observers) is almost equally efficient to the basic (steady) operation mode, while substantially lowering penalties in terms of the aerodynamic performance and required transpiration flow intensity. Finally, it is proven that when TNC is activated, the twisted blade (operating in low-thrust conditions) exhibits lower deterioration of the aerodynamic performance compared to its straight (untwisted) counterpart.