Additive Manufacturing of Silicon Oxycarbide Ceramics with Minimal Surface Structures

Abstract

Abstract The traditional ceramic powder sintering forming method severely limits the performance of the fabricated parts. Many new solutions have been achieved by precursor derived ceramics (PDC). Silicon oxycarbide ceramics as one of them has many performance advantages such as excellent mechanical properties, low density, excellent thermal stability, low thermal conductivity, and resistance to thermal shock and corrosion. In this paper, a photosensitive polysiloxane resin (PPR) with excellent light curing properties was prepared, which has high precision in the process of additive manufacturing. In addition, samples with minimal surface features in different porosity were fabricated. The compressive strength of the structure with 85%, 75%, and 65% porosity was about 9.51 MPa, 13.76 MPa, and 21.69 MPa, respectively. These porous silicon oxycarbide ceramics are likely to have a wide range of potential applications in aerospace, aviation, and other fields.