Neutronic Analysis of Modular Gas-cooled Fast Reactor for 5-25% of Plutonium Fuel using Parallelization MCNP6 Code

Abstract

Abstract Modular Gas-cooled Fast Reactor (GFR) is one of six advanced reactor concepts set by the generation IV international forum. Modular GFR has the potential for use actinide recycling and closed fuel cycle as well as applying fast reactor, using helium gas as the main coolant, high working temperature and low void reactivity effect. The neutronic analysis of nuclear reactor means behavior study of subatomic particles that interact with matter. In this paper, the feasibility of plutonium fuel in modular Gas-cooled Fast Reactor (GFR) was investigated. The Monte Carlo method has advantages in full-scale and heterogeneous three-dimensional (3D) geometry modeling using Evaluated Nuclear Data File (ENDF/B-VIII.b5) nuclear data but requires a highly computation time. Since the progress of high performance computing, the reactor physicist community began proposing to use Monte Carlo method for nuclear reactor simulation through the parallelization of calculations. The GFR feasibility design study will carried out with plutonium fuel as fuel cycle inputs with 5-25% of fissile contain. The most important neutronic parameters characterizing of GFR core are determined for beginning of life (BOL) and during burnup calculation conditions. The results of calculation series in parallel computing give the good agreement will be faster of calculation time when more threads. Materials of (U-Pu)C and (U-Pu)N fuel are the good candidates to be chosen in GFR research that give keff more than 1.2 in fissile contain 20%Pu. The variation fissile contain gives the linearity with keff. In depletion simulation, the core reactor still in critical during 20 years operation, burn up values linear with operation time and mass evolution of plutonium and uranium from start-up core to equilibrium core.