Author:
Wang Jin,Yan Jie,Liu Yongqian,Xu Zhicheng
Abstract
Abstract
As the penetration rate of wind power generation gradually increases in most grids, it is necessary to evaluate wind farms’ inertia to provide inertia information for electric grids and boost grid stability. This paper firstly models the inertia control mode of overspeed power shedding, which can realize the inertia control under the operation of different blade tip speed ratios, so that the wind turbine has a high inertia support capability. Then the energy change process in the inertia control process is analyzed, and the virtual inertia time constant is derived to evaluate a single unit’s inertia. Finally, a simple wind condition and the wind farm’s inertia control requirements in a day are simulated using an equivalent model, and the inertia level of the wind farm is calculated. The proposed research approach can alleviate the sophistication of inertia evaluation which also effectively consider the influence of inertia control.
Subject
Computer Science Applications,History,Education
Reference10 articles.
1. Evaluation of the system-aggregated potentials of inertial support capabilities from wind turbines;Imgart,2019
2. Towards an assessment of power system frequency support from wind plant—Modeling aggregate inertial response;Wu;IEEE Transactions on Power Systems,2013
3. Power system frequency management challenges-a new approach to assessing the potential of wind capacity to aid system frequency stability;Wu;IET Renewable Power Generation,2014
4. Available inertia evaluation method of the wind farm based on mixed Copula function;Han;Electric Power Automation Equipment,2021
5. Comprehensive modeling and parameter identification of wind farms based on wide-area measurement systems;Wang;Journal of Modern Power Systems and Clean Energy,2016