Author:
HaoLu ,HuLi ,LidaZhu ,Su Jikang
Abstract
Abstract
This paper uses 316L stainless steel as the powder and matrix material for laser cladding. The scanning speed is 8.18mm/s, the powder feeding rate is 1.15r/min, and the laser melting is performed with a constant laser power (1002.74W) and a layer-by-layer reduction. The laser cladding experiment of single channel multilayer straight thin-walled parts is carried out under the above machining parameters. Lower power laser cladding layer by layer can effectively control the molten pool volume and improve the forming quality and precision of straight thin-walled parts. And it can be observed that the microstructure from bottom to top changes from columnar crystals to equiaxed crystals and then to columnar crystals.
Subject
General Physics and Astronomy
Reference19 articles.
1. Using the Laser Engineered Net Shaping (LENS) process to produce complex components from a CAD solid model;Keicher,1997
2. LASER METAL FORMING: PROCESS FUNDAMENTALS;Gremaud;Surface Engineering,2014
3. Research progress of laser cladding forming technology;Jianli;Chinese Journal of Mechanical Engineering,2010
4. Titanium alloy structures for airframe application by the laser forming process;Arcella,2013
5. Research on the preparation of bio-bone materials by laser direct deposition;Weili,2014