About the dynamic error of strain gauge torque measuring devices

Abstract

Abstract The dynamic error of devices belongs to the number of errors that are difficult to estimate. The mechanism for forming this error on the example of torsional torque dynamometersis briefly considered as the most common in the practice of research on the energy of agricultural machines. The limiting ratios of frequencies of external influences and natural vibrations of strain-measuring devices are given. Recommendations are made to reduce dynamic error in torque strain analysis. The present review and the accumulated experience of strain gauge research allows us to recommend some directions for reducing dynamic errors in torque measurements. In order for a strain gauge to keep up with changes in torque in its inertial characteristics, it must have the smallest torque inertia. In order to reduce the probability of high-frequency harmonics from the elastic vibrations of the strain gauge, it must be sufficiently rigid. From this point of view, strain rods, strain sprockets, etc., having a moment of inertia greater than that of the same gear parts, are irrational. Based on modern micromodules and power supplies, the system can have a small mass and have no significant effect on the inertial characteristic of the strain gauge.