Research study of the elastic-strength and tribological characteristics of the surface after laser processing of the slurry coatings

Abstract

Abstract The research paper examines the results of applying the proposed method of the laser processing of the composite slurry coating on the steel samples` surface such as 12Kh2N4A-Sh. An increase in the elastic-strength and tribological characteristics` surface occurs as a result of the imposition of several physicochemical processes in the laser-impact zone on the applied composite slurry coating with an epoxy element as the base material with the laser thermal hardening, the diffusion influence on the atomic boron along grain boundaries, carbonization and the formation of a modified surface layer. The conducted research shows the gradient structure of the surface layers. The coating composition varies in the studied samples, however, for all experimental samples, the elastic-strength and tribological characteristics are higher than the corresponding characteristics of the standard steel sample as 12Kh2N4A-Sh, which has undergone the cementation process. The calculated values of the resistance indicators of the elastic and plastic deformation are confirmed by the conducted tribological tests. It is given the higher efficiency of the laser processing method of the slurry coating and it is concluded the prospects of the proposed method.