A pre-screening of the solvolysis recycling process for CFRPs based on the mechanical properties of the recovered fibers.

Abstract

Abstract Over the past few decades, composite materials, and specifically carbon fiber reinforced plastics (CFRPs), are finding increasing use in the automotive, aerospace, and aeronautics industries. As a result, the production of CFRPs has been significantly increased, thus leading to a corresponding increase in waste production. In the near future, landfill and incineration disposal of waste will likely be prevented due to legislation, thereby bringing forward the need to develop efficient recycling processes for CFRPs. However, recycling of CFRPs is very challenging, mainly due to the difficulty in removing the thermosetting matrix. This paper reports a pre-screening of the solvolysis recycling process for CFRPs on the basis of the mechanical properties of the recovered fibers. To this end, solvolysis tests were conducted on unidirectional CFRP samples under supercritical and subcritical conditions using acetone and water. The solvolysis tests were conducted for various conditions of temperature, pressure, and reaction time. The efficiency of the recycling processes has been evaluated by means of single-fiber tension tests on the recovered fibers, which were conducted according to the ASTM C 1557-14 standard. In most cases, the decomposition efficiency of the epoxy resin in the CFRP, measured in terms of mass, ranged between 90 and 100%. Moreover, the mechanical tests showed that the recovered fibers retained more than 58% of their initial Young’s modulus and tensile strength.