Author:
Jasim Attaa H.,Ammash Haider K.
Abstract
Abstract
The influence of column capital on punching resistance at the edge column is virtually not fully studied. This is a significant omission, as column capital under eccentric loading can arise in flat slab buildings under lateral loading from wind and earthquakes. This paper deals with the effect of using reinforced concrete column capital on the punching shear strength of the flat slab-edge column connection under eccentric loading. The study involves testing experimentally six reinforced concrete flat slab-edge column models with dimensions (1000×1600×100 mm) with two different dimensions of column capital (300×400 mm, and 500×800 mm) in addition to reference model without columns capital (column dimension 200×200mm). Two specimens as a control without columns capital where the first specimen under axial load according to column section but another under eccentric loading with eccentricity (e=half width of column). The effect of size of the column capital and were studied experimentally. We observed an increase in punching resistance by (17.02% and 27.66%) respectively over that of the reference specimen under axial load, and about (18.18% and 25%) respectively over that of the reference specimen under eccentric loading.
Subject
General Physics and Astronomy
Reference10 articles.
1. Failure analysis of column-slab connections with stud shear reinforcement;Guan;Can. J. Civ. Eng.,2003
2. Experimental investigation on punching strength and deformation capacity of shear-reinforced slabs;Lips;ACI Struct. J.,2012
3. A New Punching Shear Equation of Normal and High Strength Reinforced Concrete Flat Slabs;Ammash;J. Eng. Dev.,2012
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献