Abstract
Abstract
Nowadays, the tension stringing construction is used in UHV transmission lines. However, in the tension stringing system of UHV transmission lines, due to the flexibility of cables, such as guide ropes, ground wires, etc., in systems, the vibration will be occurred during the construction process. In order to analyze the vibration, the finite element analysis method is required for the system. In this paper, a certain position in the stringing process of the first and the last electric tower of the third section of a 1000kV UHV project was taken as the research object, the setting of constraint conditions, modal analysis and power spectrum analysis were carried out for the fast simulation calculation using APDL, the ANSYS parametric design language. It can be concluded that this method can improve efficiency of modeling and simulation and realize the rapid finite element analysis.