Author:
Meng Han,Zhang Jing,Ge Xinfeng,Huang Jinwei
Abstract
Abstract
The needle in the jetting mechanism of Pelton turbine may be uneven on the surface of the needle due to the knife marks in the cutting process or the erosion of the sediment in the water flow, resulting in the surface roughness of the needle, which affects the flow at the wall. In order to study the influence of the surface roughness of the needle on the jet flow characteristics, the jet flow characteristics and sediment characteristics of the jetting mechanism under different roughnesses were analyzed in this paper. The results show that the flow characteristics of the smooth wall and the rough wall are obviously contrasted. With the increase of the needle roughness, the jet velocity of the jetting mechanism gradually decreases, the turbulent kinetic energy of the needle surface gradually increases, the shear stress on the needle surface gradually increases, the wear amount gradually increases, the wear area increases, and the efficiency of the jet mechanism with a 1mm roughness wall decreases by about 22.3% compared with the smooth wall.
Reference20 articles.
1. The roughness of metal and processing surface [J];Geng;Internal Combustion Engine and Accessories,2021
2. Study on the inlet flow mechanism of centrifugal pump under multiple working conditions [J];Li;Thermal Power Engineering,2019
3. Study on the influence of roughness on the unsteady characteristics of centrifugal pump inlet reflux [J];Li;Thermal Power Engineering,2020
4. Effect of cascade surface roughness on boundary layer flow unde vrariable conditions;Liu;Front. Energy Res.,2022
5. Effect of dust on the performance of wind turbines[J];Khalfallah;Desalination,2007