Author:
Liu Wenhui,Lai Xinjie,Zhu Chenbing,Zhou Qiwei,Yang Xuelong
Abstract
Abstract
For the current problem of low efficiency of the annular jet pump in transporting particles, the effects of different sand diameters on the flow field, pressure and efficiency inside the annular jet pump are analysed, in order to improve the structure of the annular jet pump to adapt to the transport of solid particles. The results show that when the flow rate is relatively small, due to the small flow rate of the suction mixture, it can not meet the suction capacity of the primary flow, which causes reflux in the suction chamber or throat; with the increase of the flow rate ratio, the transport capacity of the annular jet pump for the sand shows a parabolic growth, so to maintain the efficient transport capacity, the flow rate ratio should be selected between 0.4-0.7; the efficiency of sand transport of the annular jet pump is much higher than that of the centre jet pump, and it is much higher than that of the centre jet pump. Annular jet pump compared to the centre of the pump transport sand efficiency appeared the opposite phenomenon.
Reference26 articles.
1. Flow Analysis for Single and Multi-Nozzle Jet Pump (Jets, Wakes and Separated Flows);Narabayashi;Jsme International Journal. ser. b Fluids & Thermal Engineering,2006
2. Experimental and numerical studies of the effect of area ratio and driving pressure on the performance of water and slurry jet pumps;Meakhail,2012
3. Hydrodynamic characteristics of water-jet pump for removing oils;Kumagai,1998
4. Two-dimensional numerical simulations on the performance of an annular jet pump;Kwon;J. Visualization,2002