Study on cavitation performance improvement of high-power centrifugal pump impeller

Abstract

Abstract High power centrifugal pump is frequently used in large project for water resources allocation. Cavitation phenomenon causes noise and vibration and affects the centrifugal pump unit stability. The impeller model was used an initial impeller to be developed, and the impeller geometry, the blade profile, blade inlet edge were optimized by design method based on numerical simulation technique to improve cavitation performances. The 3D model with the initial and optimized impeller were simulated to obtain cavitation characteristic. The results of optimization impeller are compared and verified by model test. The numerical simulation results show that the pressure distribution is distributed on the blade surface is uniform and the location of lowest pressure is reasonable. The test results show that the optimized design significantly increases the ratio of plant cavitation coefficient σp to incipient cavitation coefficient σi and critical cavitation coefficient σ1 of the impeller under normal operation conditions, the safety margin of cavitation is increased. It was confirmed from numerical simulation and model test results that the impeller blade optimization is a reasonable and effective method for cavitation performance improvement. The study results provides design reference for the cavitation performance improvement and safe operation of high power centrifugal pump.