Partial Replacement of Pumice Stone in Concrete As Coarse Aggregate Material

Abstract

Abstract In design of concrete structures, concrete plays an important role in the contemporary background as raw material for construction has been decreased. Therefore construction industry has acquaint with novel methods by making use of the available waste material for partial replacement by using alternative aggregates instead of ordinary aggregates. In this study, pumice stone is used as replacement materials for concrete where it is found in the abyssal of the red clay or in deepest portion of the ocean, and partially replacing by Pumice, blends with cement. The physical, mechanical and durability properties of concrete was investigated by conduction compressive strength and tensile strength on the ordinary and replaced concrete with varied percentage of pumice from 5% to 30%. It’s obsereved that environmental and economical benefits can be achieved if waste materials can be used to replace the coarse aggregate in order to use the waste materials effectively in areas with abundant availability of materials. This thesis work on the effectiveness of partial substitutions of pumice for coarse aggregate in producing adequate strength gain. In the present thesis work comparison of fresh concrete and hardened properties of concrete for both conventional concrete and Replaced concrete for varying percentage of replacement of pumice stone to coarse aggregate and based on the experimental results, it’s concluded that 25% partial replacement by pumice gives maximum compresive strength.