Author:
Anggoro Didi Dwi,Buchori Luqman,Djaeni Mohamad,Ratnawati ,Retnowati Diah Susetyo,Hadiyanto ,shidqi Ashar
Abstract
Abstract
The design of this research consisted of four stages, that is manufacture of catalysts, cellulose hydrolysis process, glucose yield test and optimization process.The research data is plotted in a mathematical model that is optimized using software of Statistica 10 with Response Surface Methodology (RSM) and ANOVA methods. From the RSM method was obtained mathematical equation model for the relationship of the combination of temperature, time and amount of catalyst to glucose levels, that is: Y = -20, 0457 + 5,341x1 -3, 245
x
2
1
+ 6, 471x2 -2,798
x
2
2
+4,697x3 -2,965x2
3 +1,241x1x2 -0,996x1x3 +0,675
x
2
3
. ANOVA method produces a value of determination coefficient (R2) as big 0.91545. In this research, the optimum temperature is at 70°C, the optimum time is at 2 hours, and the optimum amount of catalyst is at 11 grams. The results of glucose yield obtained from the optimal operating conditions is 31%.
Subject
General Physics and Astronomy
Reference17 articles.
1. Raney Ni-Sn catalyst for H2 production from biomass-derived hydrocarbons;Huber;Science,2003
2. Ethanol from cellulose: a general review;Badger;Trends in new crops and new uses,2002
3. Ratio of the effectiveness of making glucose from waste paper with hydrolysis process of acids and enzymes;Ahmad;Journal of Natural Materials Technology,2017
4. Ethanol from lignocellulosic biomass: techno-economic performance in short-, middle-and long-term;Hamelinck;Biomass and bioenergy,2005
5. Hydrolysis of Eichhornia Crassipes to Glucose over Sulfonated Active Carbon Catalyst;Anggoro;Malaysian Journal of Fundamental and Applied Sciences,2015