Formation of structure of TiNiCu alloys with high copper content upon producing by planar flow casting

Abstract

Abstract The rapidly quenched alloys of the quasibinary intermetallic TiNi-TiCu system with a high copper content (more than 25 at.%) are of great interest as shape memory materials due to the possibility of a significant decrease in the temperature and deformation hysteresis in comparison with the binary TiNi alloy. To obtain alloys with a copper content of 25 to 40 at.%, the planar flow casting technique was used. The alloys were fabricated at a melt cooling rate of about 106 K/s in the form of ribbons 30-50 μm thick and wide in the range from 7 to 20 mm. The study of the structure of the alloys was carried out using X-ray diffraction analysis, scanning and transmission electron microscopy. It was shown that from the ribbon side, contacting the quenching wheel, all alloys are amorphous, while on the non-contact side of the ribbons of alloys with 25 and 30 at.% Cu, a thin surface crystalline layer with a B2 structure is observed. Using energy dispersive X-ray spectroscopy, it was found that the content of the alloy components in the amorphous and crystalline phases coincides.