Author:
Zhao Kaijie,Zhao Liangliang,Zeng Sheng
Abstract
Abstract
In order to solve the problem of severe tension fluctuation in the winding process of strip stator, a tension control system is built with Micro-Controller Unit as controller, encoder as sensor and servo motor as actuator. Besides the employment of traditional PID feedback control, a feed-forward control link is introduced at the same time. The simulation results of PID control with and without feed-forward are compared. In addition, experiments under different working conditions are also carried out. Specifically, when the desired tension value is set at 500g along the 0.35mm enameled wire that being wound onto a strip stator at 900r/min, the tension overshoot and swing angle fluctuation are 0.88° and ±0.53° respectively. It is also found that, rather than the speed of the frame, it is the tension that significantly effects the control performance in the proposed system.
Subject
General Physics and Astronomy
Reference11 articles.
1. Research on Full Digital Tension Control System of Winding Machine [J];Song;Modular machine tool and automatic processing technology
2. Wire tension control of an automatic motor winding machine—an iterative learning sliding mode control approach[J];Lu;Robotics and Computer-Integrated Manufacturing,2018
3. Modeling and simulation analysis of winding process of wheel take-up machine [J];Wang;Computer simulation,2015
4. Modeling and H∞ control simulation of servo coil winding tensioner[J];Zhao;Journal of Mechanical & Electrical Engineering,2016
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献