Author:
Rucevskis Sandris,Kovalovs Andrejs,Chate Andris
Abstract
Abstract
This work presents an approach for optimal placement of strain sensors in composite circular cylindrical shells. The approach uses numerical strain values in longitudinal and transverse directions extracted from the top surface of the thin-walled composite cylindrical shell. Numerical model of composite cylindrical shell was modelled using the FE commercial solver ANSYS. The modal analysis was performed to determine the first 12 natural frequencies and corresponding mode shapes. Number of sensors and their locations were obtained taking into account physical constraints of strain sensors and optimization strategies. Finally, the optimal sensor placements were obtained. Maximal number of sensors in each direction equals 30.
Subject
Computer Science Applications,History,Education
Reference32 articles.
1. Experimental Study and Modelling on The Structural Response of Fiber Reinforced Concrete;Lusis;Applied Science,2022
2. Experimental Investigation and Modelling of the Layered Concrete with Different Concentration of Short Fibers in the Layers Fibers;Lusis;Spec. Issue Mech. Fiber Reinf. Cem. Compos,2021
3. Identification of elastic properties of composite plate;Kovalovs;IOP Conf. Ser.: Mater. Sci. Eng.,2011
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献