RSC: A 3D printed eyeball phantom for Sr-90 dosimetry measurements

Abstract

Abstract Strontium 90 (Sr-90) has been commonly used in the radiation treatment of pterygia of the eye. A radioactive plaque is placed in an applicator onto the surface of the eyeball for a specific length of time to achieve a desired dose. Dose is usually calculated using source activity and decay, as well as the distance from it to the surface of the eye. However, this assumes a flat eye surface. This investigation used 3D printing to produce an anthropomorphic eyeball phantom on which to perform dosimetry measurements for two different applicator sizes. These doses were compared to planar geometry measurements and a dose difference found. While planar geometry measurements are useful for routine quality assurance, measurements of the effects of the curved surface on dose calculations can provide valuable clinical information.