Author:
Jiang Benchi,Li Jiankang,Du Xin,Duan Pengfei,Wang Jianbin
Abstract
Abstract
In order to achieve the smooth transition of the end-tool pose of the industrial robot, after determining the pose of the teaching points of the robot. Firstly, the path of the pose change between the adjacent teaching points is constructed by using the SLERP method, then, the position of the start and end points of the attitude transition curve is determined, and the expression of the attitude trajectory curve is obtained. According to the relation between the derivative of quaternion and Angular Velocity, the conversion between unit quaternion and angular velocity is realized by using Newton-Cortez formula. Finally, the velocity of the fitted industrial robot’s tool’s attitude trajectory is planned, and the whole attitude trajectory is interpolated.
Subject
General Physics and Astronomy
Reference16 articles.
1. Robot machining: Recent development and future research issues[J];Chen;The International Journal of Advanced Manufacturing Technology,2013
2. Cartesian compliance identification and analysis of an artificulated machining robot[J];Slavkovic;FME Transactions,2013
3. Towards Industrial Robot Learning from Demonstration[C];Wilson,2015
4. Collaborative Learning of Hierarchical Task Networks from Demonstration and Instruction[J];Mohsenikabir,2015
5. Continuous curvature path-smoothing algorithm using cubic Bezier spiral curves for non-holonomic robots[J];Yang;Advanced Robotics,2013
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
1. Quaternion Slerp for Attitude Estimation of Dual Spin-Stabilized Satellite;2021 IEEE International Conference on Aerospace Electronics and Remote Sensing Technology (ICARES);2021-11-03