Novel Algebraic Matrix Method Used to Generate Linear Equation for Surface Roughness and Material Removal Rate during Wet/Dry Turning Operation on MMCs Al6061-T6/SiC

Abstract

Abstract Stir casting process is well known for reinforcement of ceramic particle in aluminium. Due to improved properties of Al6061-T6/SiC particulate metal matrix composites have attracted by industry as well as received wider attention of material expertise. The purpose of this study is to evaluate the turning process parameters through algebraic matrix which is unique approach. Also studied effects of spindle speed, feed, SiC silicon carbide-3% and 6%, depth of cut and nose radius on modifier element for instance surface roughness Ra and material removal rate MRR in both dry and wet condition. In addition to optimize the turning process parameters are on Al6061-T6/SiC 3% and 6% with a coated tungsten tool. The experimental runs are designed using the taguchi based multiple factorial design DOE and their outcomes are analyzed using Analysis of Variance ANOVA. Mathematical models are established using algebraic matrix to represent the relationship among turning process parameters as independent variables, surface roughness and material removal rate as dependent variables. For every experimental run, a same cutting insert was used to encourage accurate reporting of the surface roughness and material removal rate. The statistical variations revealed that the main effect of spindle speed, feed, SiC silicon carbide-3% and 6%, depth of cut and nose radius are influenced the surface roughness and material removal rate. Moreover, Built-up-edge BUE formation was observed at every combinations of machining parameters such as spindle speed, feed, SiC silicon carbide-3% and 6%, depth of cut and nose radius which affected the surface quality negatively. The proximity of predicted results and experimental results provide proof that the algebraic matrix – DOE method has successfully established the predictive models. It is strongly suggested SiC silicon carbide 3% and 6% are successfully reinforced in Al6061 as well as optimize turning process parameters in wet condition than dry condition. Mathematical models for surface roughness and material removal rate are found to be statistically significant in wet condition.