Types of overvoltages in 10-35 kV distribution networks and modern methods and means of their limitation

Abstract

Abstract The basis for the transmission of electrical energy from sources to receivers are overhead power lines 10-35 kV. In these networks, an isolated transmission line or transmission line, grounded through resistors or using arc-quenching reactors, is used. The Republic of Mari El uses networks with isolated transmission line, the total length of which is more than 7000 km. When operating distribution networks, their insulation is affected by a number of internal factors such as long-term operating voltage and voltage fluctuations, short-term overvoltages associated with arc closures, wire breaks, and insulation overlaps. These networks are located on an open area, so they are exposed to lightning overvoltages, temperature, wind loads (mechanical forces), precipitation (snow, humidity). Overvoltages occurring in electrical systems are one of the main factors that significantly affect the reliability of power supply. Despite the short-term effects, overvoltages are characterized by a high multiplicity with respect to the long-term operating voltage, the impact on all electrically connected elements of the system, regardless of the place of occurrence. Overvoltage is the main cause of defects and accelerated aging of structural components. Currently, 90 % of 10-35 kV overhead lines are made on the basis of the use of reinforced concrete structures of supports that require grounding devices, depending on the value of the soil resistivity. Highspeed vacuum circuit breakers are used as switching devices in modern distribution networks of 10-35 kV. The specific properties of vacuum as an arc-quenching medium contribute to the transients in their switching, which require scientific understanding.