Author:
Carra F,Accettura C,Bertarelli A,Berthomé E,Bruce R,Charitonidis N,Dalemir M,Farina E,Valenzuela J Guardia,Guinchard M,Lechner A,Nuiry F-X,Marcone A Perillo,Pfeiffer S,Glaude D,Rigutto E,Sacristan de Frutos O,Simon P,Redaelli S,Perez-Fontenla A T,Vollenberg W
Abstract
Abstract
In 2017, a proton-impact test on HL-LHC collimator materials was carried out in the HiRadMat facility at CERN. The experiment, called “MultiMat”, enabled the testing of uncoated and coated material composites and alloys, in most of the cases developed at CERN, for different beam collimation functionalities. Manufacturing of these materials was then passed to industry, leading to a series production for use in the collimators installed in the LHC during Long Shutdown 2 (LS2). The industrial versions of bulk and coating materials were tested in HiRadMat in 2021 in the “MultiMat-2” experiment, that efficiently re-used the same experimental test bench as for “MultiMat”. This new experiment demonstrated the reliability of the absorbers installed in LS2, and confirmed the possible use of alternative materials and coatings for the next LS3 collimator production. This paper describes the preparation and beam parameters of “MultiMat-2”, the experimental setup and the main results of the experiment.