Study of the silica–magnesia relationship in silicate slags on electrical conductivity at high temperature

Abstract

Abstract Slags are metallurgical aggregates with beneficial minerals and in some processes, they constitute the most abundant mass of the operation and for this reason their control is necessary. These materials have physicochemical behaviors that serve to model the process variables. A particular condition of silicate slags in processes for obtaining some ferroalloys is that there are relationships between compounds that allow predicting the behavior of other variables, these relationships are maintained during production. This study aims to know the electrical behavior of a slag so that the data will contribute to have an additional control in the operation of an electric arc furnace. An alumina content of up to 50% was gradually added to one sample and the other was remelted on three occasions, for all cases the electrical conductivity was determined at a temperature between 1400 °C and 1600 °C. For the electrical resistance value, a Miller 400 type resistivity measurement advice was used, and the temperature was achieved by melting the samples in a high-frequency induction furnace with a collapsible silicon carbide crucible, lined with high-grade refractory alumina. Analysis of the electrical conductivity data for silicate slags made it possible to demonstrate that they are proportional to the values of the major oxides of the slag in their silica-magnesia ratio.